Friendship and inheritance

Friend functions

In principle, private and protected members of a class cannot be accessed from outside the same class in which they are declared. However, this rule does not apply to "friends".

Friends are functions or classes declared with the friend keyword.

A non-member function can access the private and protected members of a class if it is declared a friend of that class. That is done by including a declaration of this external function within the class, and preceding it with the keyword friend:

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
// friend functions
#include <iostream>
using namespace std;

class Rectangle {
    int width, height;
  public:
    Rectangle() {}
    Rectangle (int x, int y) : width(x), height(y) {}
    int area() {return width * height;}
    friend Rectangle duplicate (const Rectangle&);
};

Rectangle duplicate (const Rectangle& param)
{
  Rectangle res;
  res.width = param.width*2;
  res.height = param.height*2;
  return res;
}

int main () {
  Rectangle foo;
  Rectangle bar (2,3);
  foo = duplicate (bar);
  cout << foo.area() << '\n';
  return 0;
}
24


The duplicate function is a friend of class Rectangle. Therefore, function duplicate is able to access the members width and height (which are private) of different objects of type Rectangle. Notice though that neither in the declaration of duplicate nor in its later use in main, member function duplicate is considered a member of class Rectangle. It isn't! It simply has access to its private and protected members without being a member.

Typical use cases of friend functions are operations that are conducted between two different classes accessing private or protected members of both.

Friend classes

Similar to friend functions, a friend class is a class whose members have access to the private or protected members of another class:

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
// friend class
#include <iostream>
using namespace std;

class Square;

class Rectangle {
    int width, height;
  public:
    int area ()
      {return (width * height);}
    void convert (Square a);
};

class Square {
  friend class Rectangle;
  private:
    int side;
  public:
    Square (int a) : side(a) {}
};

void Rectangle::convert (Square a) {
  width = a.side;
  height = a.side;
}
  
int main () {
  Rectangle rect;
  Square sqr (4);
  rect.convert(sqr);
  cout << rect.area();
  return 0;
}
16


In this example, class Rectangle is a friend of class Square allowing Rectangle's member functions to access private and protected members of Square. More concretely, Rectangle accesses the member variable Square::side, which describes the side of the square.

There is something else new in this example: at the beginning of the program, there is an empty declaration of class Square. This is necessary because class Rectangle uses Square (as a parameter in member convert), and Square uses Rectangle (declaring it a friend).

Friendships are never corresponded unless specified: In our example, Rectangle is considered a friend class by Square, but Square is not considered a friend by Rectangle. Therefore, the member functions of Rectangle can access the protected and private members of Square but not the other way around. Of course, Square could also be declared friend of Rectangle, if needed, granting such an access.

Another property of friendships is that they are not transitive: The friend of a friend is not considered a friend unless explicitly specified.

Inheritance between classes

Classes in C++ can be extended, creating new classes which retain characteristics of the base class. This process, known as inheritance, involves a base class and a derived class: The derived class inherits the members of the base class, on top of which it can add its own members.

For example, let's imagine a series of classes to describe two kinds of polygons: rectangles and triangles. These two polygons have certain common properties, such as the values needed to calculate their areas: they both can be described simply with a height and a width (or base).

This could be represented in the world of classes with a class Polygon from which we would derive the two other ones: Rectangle and Triangle:


The Polygon class would contain members that are common for both types of polygon. In our case: width and height. And Rectangle and Triangle would be its derived classes, with specific features that are different from one type of polygon to the other.

Classes that are derived from others inherit all the accessible members of the base class. That means that if a base class includes a member A and we derive a class from it with another member called B, the derived class will contain both member A and member B.

The inheritance relationship of two classes is declared in the derived class. Derived classes definitions use the following syntax:

class derived_class_name: public base_class_name
{ /*...*/ };

Where derived_class_name is the name of the derived class and base_class_name is the name of the class on which it is based. The public access specifier may be replaced by any one of the other access specifiers (protected or private). This access specifier limits the most accessible level for the members inherited from the base class: The members with a more accessible level are inherited with this level instead, while the members with an equal or more restrictive access level keep their restrictive level in the derived class.

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
// derived classes
#include <iostream>
using namespace std;

class Polygon {
  protected:
    int width, height;
  public:
    void set_values (int a, int b)
      { width=a; height=b;}
 };

class Rectangle: public Polygon {
  public:
    int area ()
      { return width * height; }
 };

class Triangle: public Polygon {
  public:
    int area ()
      { return width * height / 2; }
  };
  
int main () {
  Rectangle rect;
  Triangle trgl;
  rect.set_values (4,5);
  trgl.set_values (4,5);
  cout << rect.area() << '\n';
  cout << trgl.area() << '\n';
  return 0;
}
20
10


The objects of the classes Rectangle and Triangle each contain members inherited from Polygon. These are: width, height and set_values.

The protected access specifier used in class Polygon is similar to private. Its only difference occurs in fact with inheritance: When a class inherits another one, the members of the derived class can access the protected members inherited from the base class, but not its private members.

By declaring width and height as protected instead of private, these members are also accessible from the derived classes Rectangle and Triangle, instead of just from members of Polygon. If they were public, they could be access just from anywhere.

We can summarize the different access types according to which functions can access them in the following way:

Accesspublicprotectedprivate
members of the same classyesyesyes
members of derived classyesyesno
not membersyesnono

Where "not members" represents any access from outside the class, such as from main, from another class or from a function.

In the example above, the members inherited by Rectangle and Triangle have the same access permissions as they had in their base class Polygon:

1
2
3
4
5
Polygon::width           // protected access
Rectangle::width         // protected access

Polygon::set_values()    // public access
Rectangle::set_values()  // public access  


This is because the inheritance relation has been declared using the public keyword on each of the derived classes:

 
class Rectangle: public Polygon { /* ... */ }


This public keyword after the colon (:) denotes the most accessible level the members inherited from the class that follows it (in this case Polygon) will have from the derived class (in this case Rectangle). Since public is the most accessible level, by specifying this keyword the derived class will inherit all the members with the same levels they had in the base class.

With protected, all public members of the base class are inherited as protected in the derived class. Conversely, if the most restricting access level is specified (private), all the base class members are inherited as private and thus cannot be accessed from the derived class.

For example, if daughter were a class derived from mother that we defined as:

 
class Daughter: protected Mother;


This would set protected as the less restrictive access level for the members of Daughter that it inherited from mother. That is, all members that were public in Mother would become protected in Daughter. Of course, this would not restrict Daughter from declaring its own public members. That less restrictive access level is only set for the members inherited from Mother.

If no access level is specified for the inheritance, the compiler assumes private for classes declared with keyword class and public for those declared with struct.

What is inherited from the base class?

In principle, a derived class inherits every member of a base class except:

  • its constructors and its destructor
  • its assignment operator members (operator=)
  • its friends
  • its private members

Although the constructors and destructors of the base class are not inherited as constructors and destructors in the derived class, they are still called by the derived class's constructor. Unless otherwise specified, the constructors of derived classes call the default constructors of their base classes (i.e., the constructor taking no arguments), which must exist.

Calling a different constructor of a base class is possible, using the same syntax as to initialize member variables in the initialization list:

derived_constructor_name (parameters) : base_constructor_name (parameters) {...}

For example:

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
// constructors and derived classes
#include <iostream>
using namespace std;

class Mother {
  public:
    Mother ()
      { cout << "Mother: no parameters\n"; }
    Mother (int a)
      { cout << "Mother: int parameter\n"; }
};

class Daughter : public Mother {
  public:
    Daughter (int a)
      { cout << "Daughter: int parameter\n\n"; }
};

class Son : public Mother {
  public:
    Son (int a) : Mother (a)
      { cout << "Son: int parameter\n\n"; }
};

int main () {
  Daughter kelly(0);
  Son bud(0);
  
  return 0;
}
Mother: no parameters
Daughter: int parameter

Mother: int parameter
Son: int parameter


Notice the difference between which Mother's constructor is called when a new Daughter object is created and which when it is a Son object. The difference is due to the different constructor declarations of Daughter and Son:

1
2
Daughter (int a)          // nothing specified: call default constructor
Son (int a) : Mother (a)  // constructor specified: call this specific constructor 


Multiple inheritance

A class may inherit from more than one class by simply specifying more base classes, separated by commas, in the list of a class's base classes (i.e., after the colon). For example, if the program had a specific class to print on screen called Output, and we wanted our classes Rectangle and Triangle to also inherit its members in addition to those of Polygon we could write:

1
2
class Rectangle: public Polygon, public Output;
class Triangle: public Polygon, public Output; 


Here is the complete example:

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
// multiple inheritance
#include <iostream>
using namespace std;

class Polygon {
  protected:
    int width, height;
  public:
    Polygon (int a, int b) : width(a), height(b) {}
};

class Output {
  public:
    static void print (int i);
};

void Output::print (int i) {
  cout << i << '\n';
}

class Rectangle: public Polygon, public Output {
  public:
    Rectangle (int a, int b) : Polygon(a,b) {}
    int area ()
      { return width*height; }
};

class Triangle: public Polygon, public Output {
  public:
    Triangle (int a, int b) : Polygon(a,b) {}
    int area ()
      { return width*height/2; }
};
  
int main () {
  Rectangle rect (4,5);
  Triangle trgl (4,5);
  rect.print (rect.area());
  Triangle::print (trgl.area());
  return 0;
}
20
10  

Index
Index